Articles | Volume 6
https://doi.org/10.5194/ars-6-303-2008
https://doi.org/10.5194/ars-6-303-2008
26 May 2008
 | 26 May 2008

Establishing a link to given radiated emission limits during extending the frequency range above 1 GHz

H. Garbe and S. Battermann

Abstract. Up to now most limits for radiated emission are given as values for the electrical field strength. Battermann, 2007 has shown that the frequency range extension for radiated emission measurements above 1 GHz generates a lot of problems while performing the test on a classical test site as depicted in Fig. 1. This paper will give a motivation to use an other measurand namely the total-radiated-power than electrical field strength by using alternative test sites like reverberation chambers, TEM-waveguides, Fully Anechoic Rooms (FAR) etc. Nevertheless most of the existing standards still specify electrical field strength limits. This paper will show how to set the parameters in the given algorithm to establish a link between measured total radiated power and equivalent electrical field values.