Articles | Volume 13
https://doi.org/10.5194/ars-13-155-2015
https://doi.org/10.5194/ars-13-155-2015
03 Nov 2015
 | 03 Nov 2015

Analysis of the effect of different absorber materials and loading on the shielding effectiveness of a metallic enclosure

S. Parr, H. Karcoon, S. Dickmann, and R. Rambousky

Related authors

Investigating Electromagnetic Interference Induced Risks for Autonomous Driving
Tim Brandt, Sven Fisahn, Martin Schaarschmidt, Unai Aizpurua, Erik Kampert, and Stefan Dickmann
Adv. Radio Sci., 22, 29–34, https://doi.org/10.5194/ars-22-29-2024,https://doi.org/10.5194/ars-22-29-2024, 2024
Short summary
Common mode chokes and optimisation aspects
T. Kut, A. Lücken, S. Dickmann, and D. Schulz
Adv. Radio Sci., 12, 143–148, https://doi.org/10.5194/ars-12-143-2014,https://doi.org/10.5194/ars-12-143-2014, 2014

Cited articles

Dawson, L., Dawson, J. F., Marvin, A. C., and Welsh, D.: Damping resonances within a screened enclosure, IEEE Trans. Electromagn. Compat., 43, 45–55, 2001.
Ihsan, Z., Lubkowski, G., Adami, C., and Suhrke, M.: Characterization of the absorbing material used in EMC experiments, in: Proc. EMC Europe 2011 York, 774–777, 2011.
Izzat, N., Craddock, I. J., Hilton, G. S., and Railton, C. J.: Analysis and realisation of low-cost damped screened rooms, IEE Proceedings-Science, Measurem. Technol., 145, 1–7, 1998.
Nicolson, A. M. and Ross, G. F.: Measurement of the Intrinsic Properties of Materials by Time-Domain Techniques, IEEE Trans. Instrum. Meas., 19, 377–382, 1970.
Olyslager, F., Laermans, E., De Zutter, D., Criel, S., De Smedt, R., Lietaert, N., and De Clercq, A.: Numerical and experimental study of the shielding effectiveness of a metallic enclosure, Electromagnetic Compatibility, IEEE Transact., 41, 202–213, 1999.
Download
Short summary
Absorbers used for improving the Shielding Effectiveness (SE) are compared in their electromagnetic performance. Therefore the permittivity and permeability are determined with a coaxial line experiment. The effect of loading in the form of metallic and dielectric structures inside a metallic enclosure on the SE is analyzed. It turns out, that the SE can be improved by using absorber. Also, the SE is affected by loading inside the metallic enclosure.